top of page

Please Note: The rear disc brake system in this kit is designed for use with factory rear ends only. It will not work with aftermarket rear ends. 

 

*If you will be ordering an aftermarket rear end, please contact us.  We have a solution for you.

 

Hub Diameter: 2.780"

 

Max Flange Diameter: 6.100"

 

*Must use 15" or larger rims.

 

1962-1967 Nova/Chevy II Front Disc Brake Kit includes:

  • Stock height spindles
  • Front vented 11" rotors 5"x4.75" w/ 7/16" studs
  • Dust caps
  • Inner & outer bearings, seals, & mounting hardware
  • Front caliper brackets
  • Backing plates
  • Front rubber brake hoses
  • Large GM single piston calipers pre-loaded with pads

 

Complete Rear Disc Brake Conversion Kit Includes:

  • Rear 11" vented GM rotors multi pattern
  • Fits 5 x 4.75" w/ 7/16" Studs 
  • Large GM large bore single piston calipers w/ self adjusting E-brake
  • D54 pads included
  • Caliper brackets & spacers
  • Bracket hardware
  • Rubber brake hoses hoses & clips
  • Emergency brake cables

 

Tech Notes:

  • Maximum diameter of 6.100" to fit rotor hat.
  • .050" x 45 degree chamfer
  • 2.780" max register axle
  • Does not fit 14" rims must use 15" or larger
  • When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder will be needed.

 

1962-1967 Nova/Chevy II

  • Zinc 3 stud 9" power brake booster
  • Cast iron master cylinder
  • Disc/ Disc brass proportioning valve
  • Left mount proportioning valve Kit (2) 3/8"-24 for front brakes  & (1) 9/16"-18 for rear brakes
  • Valve bracket, lines, & brake light warning switch, mounting hardware
  • Angle firewall brackets
  • Pedal rod extension & clevis

1962-1967 Nova/Chevy II Front and Rear, Complete Power Disc Brake Conversion Kit

$1,345.00Price
Caliper Color
    bottom of page