top of page

Mopar A Body Disc Brake Wheel Kit Includes:

  • 11" Standard Rotors with 5x4.5 Bolt Pattern 

  • 11" Standard Rear Rotors Multi-Drilled with 5x4.5 & 5x4 Bolt Pattern
  • Loaded Front Large Kelsey Hayes Single Piston Calipers

  • Rear Emergency Brake Calipers Loaded w/ Pads
  • Front Backing Plates

  • Stock Height Spindles

  • 7/16 Rubber Brake Hoses

  • Bearings/ Seals / Dust Caps &  all Hardware

  • Lower Ball Joint & Steering Arm Replacements


Brake Booster Conversion Kit

  •     7" Single Black Brake Booster

  •     Black firewall bracket & linkage

  •     Cast Iron Master Cylinder

  •     Adjustable Proportioning Valve w/ 3/8 fittings

  •     Vacuum hose & fittings


Our BRAND NEW Dodge A body disc brake kit REDESIGN Features all new parts that does NOT require you to change out your control arms Saves your customer 25% or more. New Re-Design gives you a bolt on drum to disc conversion with all new lower ball joints!

** NOTE*** 

  • Depending on what has been done to your engine over the years you may need to move the windshield washer fluid tank and re route those lines.
  • The stock air filter that came with the v6 engines is a haus and you may need to convert to an aftermarket air cleaner to be able to get the clearance you need to install the kit. 
  • The booster conversion kit is not OE style and is an after market product.
  • The brake line tube nuts will not automatically screw in to the master cylinder and adapters will be needed. Our suggestion is to splice in a jumper line from the old location of the manual master cylinder on the firewall and run the lines the 15.5" inches you need to make it to the master.
  • If you have a larger battery than what came stock with your car the unit may be 1" too long and may need to get a smaller battery to get the unit to fit.

1962-1972 A Body Front & Rear Power Disc Brake Conversion Kit

SKU: 6272834A45MPDC201
    bottom of page