Please Note: The rear disc brake system in this kit is designed for use with factory rear ends only. It will not work with aftermarket rear ends.
*If you will be ordering an aftermarket rear end, please contact us. We have a solution for you.
Hub Diamter: 2.780"
Max Flange Diameter: 6.100"
*Must use 15" or larger rims.
1967-1969 Camaro/ Firebird Front Disc Brake Kit includes:
- Stock height spindles
- Front vented 11" rotors 5"x4.75" w/ 7/16" studs
- Dust caps
- Inner & outer bearings, seals, & mounting hardware
- Front caliper brackets
- Backing plates
- Front rubber brake hoses
- Large GM single piston calipers pre-loaded with pads
Complete Rear Disc Brake Conversion Kit Includes:
- Rear 11" vented GM rotors multi pattern
- Fits 5 x 4.75" w/ 7/16" Studs
- Large GM large bore single piston calipers w/ self adjusting E-brake
- D54 pads included
- Caliper brackets & spacers
- Bracket hardware
- Rubber brake hoses hoses & clips
- Emergency brake cables
- Maximum diameter of 6.100" to fit rotor hat.
- .050" x 45 degree chamfer
- 2.780" max register axle
- Does not fit 14" rims must use 15" or larger
- When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder will be needed.
1967-1969 F Body
- Power brake booster
- Cast iron master cylinder
- Disc/ Disc brass proportioning valve
- Left mount proportioning valve Kit (2) 3/8"-24 for front brakes & (1) 9/16"-18 for rear brakes
- Valve bracket, lines, & brake light warning switch, mounting hardware
- Angle firewall brackets
- Pedal rod extension & clevis