CALTRACS STANDARDDRAG (2400) 2 Hole Pivot Plate
CALTRACS STANDARD LOW PRO (2401) 1 Hole Pivot Plate
Low Profile allows approx. 1.5″ more ground clearance for vehicles used for every day street driving.
1970-1981 Chevrolet Camaro*
1970-1981 Pontiac Firebird
1970-1981 Pontiac Trans Am
*If your Camaro’s rear shocks have been moved from stock location, please call us at 260-301-2424, Mon-Fri, 9:00am-5:00pm, EST
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.