top of page

This rear is setup to re-use your factory drum brakes or use aftermarket disc.  Choice of housing ends. See below for more infomation.


1967-1969 Camaro, Firebird, F-Body

  • Stock width 60" wheel mounting surface to wheel mounting surface
  • Leaf spring perches welded in the stock location
  • Moser Engineering 12 Bolt - USA made casting
  • 3" tubes / 1/4" wall - seamless DOM
  • Powdercoated Housing - Semi Gloss Black
  • 30 spline Moser Engineering bolt in style axles
  • Truetrac posi - 30 Spline
  • Choice of gear ratio
  • 1310 stock or 1350 yoke
  • Aluminum Girdle Moser Engineering rear cover
  • 5 x 4 3/4 bolt pattern 
  • 7/16 Stock or 1/2-20 Studs
  • Retainer plates
  • Bolt in style housing ends
  • 88128 1 Piece ball bearing
  • Made to work with your stock drum brakes or aftermaket disc
  • 2.771" Hub, 5.850" Flange, Access Holes


This rear can be made to accomodate your stock rear drum brakes. We provide you with retainer plates and these axles bolt in with the 9" press on bearing style housing ends. The 4 bolt spread is like an early Camaro, Chevelle, Nova style drum backing plate.  Contact us if you have questions. This requires opening the hole in your backing plate for the 3.150" OD bearing to pass through. 


Second, this rear can also be setup for the industry standard Big Ford New Style Torino Housing end, also know as the Late Ford. Want to use your own aftermarket brake kit? Give the disc brake supplier the following information:


  • Big Ford New Style Torino
  • 3.562 x 2.000" Spread with 3/8" holes
  • 2 1/2" Brake offset
  • 2.771" Hub
  • 5.850" Flange OD
  • Access holes 


If you brake supplier has issues with this, contact us for your braking needs. We have new drum kits, economy options, Explorer disc, Wilwood Engineering, and Baer Disc Brake options for your build. Have other brakes you want to try to use? Contact us and we will see what we can do to accomodate your needs. 


12 bolt internals are 12 bolt passenger car spec. Axle bearings are RW508 or 88128 1 piece ball bearings found at any part store. 3.150" OD x 1.531" ID


We recommend Lucas 80/90 non-synthetic with no additives with Truetrac differentials. 


If you would like to narrow this rear, do a different powdercoat color, add a second bolt pattern, switch to larger axles, use a differnt posi, buy a fully asssembled rear end, hold the shipment at your local terminal, we can accommodate your needs. Reach out to us and we will get you a custom quote. 


You can expect a 5-7 day lead time for powder coated Moser rear ends. 


Sales tax only applies to Indiana residents. 


Any questions, leave a note or contact us a 260-334-2553


1967-1969 Camaro, 12 Bolt, 30 Spline Bolt In Style Axles, Truetrac Posi, Moser

    bottom of page