These hoses and cables are part of completing your rear end. The 220-7056 is a hose kit that fit a Moser welded on tab and calipers with an 1/8"NPT inlet. From this fixed point, you will custom bend hard lines from this fixed location. These flex hoses are nice to be able to pull off the caliper without unhooking the lines.
The parking brake cable kit 330-9371 is a universal trim to fit design. The clevis mounts to the back side of the Wilwood caliper bracket to apply pressure on the internal drum mechanism. The cable block assembly has a variety of ways to mount into your hardware. Want to see some instructions? Follow the link below:
Wilwood Instructions for 330-9371
330-9371 Parking Brake Kit Information:
Wilwood’s Parking Brake Cable Kits contains all parts necessary for effective parking brake installation on most vehicles. Kits are available as universal Disc/Drum, MC-4 and CPB Caliper attachments. Also vehicle specific kits are available and can be found through the Year/Make/Model lookup.
220-7056 Information:
| Size & Fittings | |
|---|---|
| Length | 14.00 |
| Size | -3 |
| Chassis Fitting Size | -3 to 3/8-24 IF |
| Inlet Fitting | -3 Female |
| Inlet Fitting Angle | Straight |
| Outlet Fitting | -3 Female |
| Outlet Fitting Angle | Straight |
| Caliper Fit Angle | 90 Degree |
| Caliper Fit Thread | 1/8-27 NPT |
| Additional Info | |
| Weight (lb) | 0.80 |
| Qty Each | 1 |
| Qty per Kit | 2 |
| Chassis Clip | 300-15780 |
Have questions? Need a different hose kit? Contact us! 260-301-2424
